|
|
|
|
|
|
|
Manufacturers
and suppliers of: rubber and plastic mouldings,
extrusions, gaskets, washers, sheeting, matting,
strip, grommets, cord, hose and tubing.
The samples shown below are only a small selection
of our full range which include: Neoprene, Nitrile,
Insertion, EPDM, Silicone, Cork and Non Asbestos
Please
contact us for full specifications and quality
samples.
|
 |
|
RP5
– Solid Rubber
|
|
Polymer:
available in Neoprene, Nitrile, Insertion, EPDM.
Includes: BS1154, BS2751, BS2752 & WRC approved.
Temperature range: -40°C to +110°C.
|
|
| RP11
– White Food Quality |
|
Specification:
FDA approved also available in Nitrile, Neoprene
and PDM.
Hardness: 45 / 70 Shore A. Temperature range:
-40oC to +110°C. Application: salt water,
alcohol, alkaline, acid, oil resistant with good
ageing.
|
|
|
RP35
Tan Shotblast
|
Hardness:
35 / 45 Shore A. Temperature range: -40°C
to +80°C.
Application: good elasticity & abrasion resistant. |
|
| RP60 Fine Ribbed Matting |
Hardness:
65 / 75 Shore A. Temperature range: -10°C
to +80°C.
Application: slip resistant and hard wearing, grades
include electrically tested to BS921. |
|
| RP61
Flat Ribbed Matting |
Hardness:
65 / 75 Shore A. Temperature range: -10°C
to +80°C.
Application: slip resistant and hard wearing. |
|
| RP62
Broad Ribbed Matting |
Hardness:
65 / 75 Shore A. Temperature range: -10°C
to +80°C.
Application: entrance matting, slip resistant and
hard wearing. |
|
| RP115
PVC Nitrile Sponge |
Specification
to: ASTM D1056(84)SBE41-B2, C, M. FMVSS 302.
Density: 80/130 kg/m3. Temperature range: -40°C
to +95°C.
Applications: self extinguishing, fuel & oil
resistant, good thermal. |
|
| RP140
Felt |
Specification
to:Defence Standard 83-19 BS4060 & BS2087.
Density: Average 260 KG/M3. Temperature range: -20°C
to +100°C.
Applications: dust & oil resistant. |
|
| RP150
Polyethylene foam |
Specification
to: Black & White
Density: Average 18/60 kg/m3. Temperature range:
-70°C
to +95°C.
Applications: weather & ozone resistant. |
|
| RP140
Felt |
Specification
to:Defence Standard 83-19 BS4060 & BS2087.
Density: Average 260 KG/M3. Temperature range: -20°C
to +100°C.
Applications: dust & oil resistant. |
|
| RP100
EPDM Sponge |
Specification
to: ASTM D1056(84) RE41-BC,2.
Density:140kg/m3. Temperature range: -40°C
to +100°C.
Application: weather, heat and UV resistant. |
|
| RP110
Neoprene Sponge |
Specification
to: ASTM D1056(84) SCE42B2, C, M
Density:175kg/m3. Temperature range: -20°C
to +100°C.
Application: oil, heat & weather, air &
U.V., acids. |
|
|
|
|
|
